Turn signals Akron-Flash

Handlebar-mounted turn signal HIGHSIDER AKRON-FLASH LED CNC-milled aluminum housing, bead-blasted black satin finish with black anodized cap, tinted glass

HOMOLOGATED

Sold in pairs

HIGHSIDER AKRON-FLASH CE-approved turn signal/position light LED handlebar end as front direction indicator - curved handlebar end with turn signal and position light function.

With these 2in1 handlebar end turn signals, HIGHSIDER once again demonstrates its flair for exceptional design and maximum functionality. The latest-generation ultra blinker lights from HIGHSIDER, with adjustable flashing angle, provide unequivocal directional indication. The handlebar-end turn signals are simply stunning, with their tinted glass, high-quality CNC-milled aluminum housing and distinctive cap. So harmoniously packaged, the front turn signals literally disappear from the vehicle when not in use. Easy to fit, thanks to the clamping system with different sleeves. Universal adaptation for 7/8", 1" or X-Bar handlebars with internal diameters from 12 to 22 mm. The cables are laid in the handlebars and have a good length of around 100 cm to lay. Expect to see the HIGHSIDER AKRON-FLASH LED handlebar turn signal/position light combination, which is anything but ordinary.

Setting the tone - with the innovative HIGHSIDER turn signal series, you show not only where you want to go, but also who you are. It's the trendiest design there is.

Accessory TIP:

The optional PL control box HIGHSIDER CB2 turns off the position light during the flashing process and lights up again after the flashing process (with a small delay).

Dimensions:

• Width: 36 mm


• Diameter: 34.5 mm


• Cable length: approx. 1000 mm

The angle of the light modules can be infinitely adjusted to 26°.

Connections:

Power consumption: 13.5V, 0.27A, 3.65W and 13.5V, 0.11A 1.49W

• Yellow cable = flasher (+)


• White cable = position light (+)


• Black cable = ground (-)

Scope of delivery: 1 pair

• 2 x clamping sleeves Ø 13 mm, Ø 16 mm


• 3 x centering ring


• 2 x central screw M6 with mounting ring for HIGHSIDER AKRON-FLASH, and conical nut M6